Windows 11 Stuck on “Preparing Automatic Repair”? (Ultimate Deep Fix Guide 2026)

 💡 Description

Fix Windows 11 stuck on “Preparing Automatic Repair” with this advanced step-by-step guide. Break boot loop easily.

 📌 Introduction

       Is your Windows 11 PC stuck on the “Preparing Automatic Repair” screen? This issue usually appears when Windows fails to boot properly and tries to fix itself—but gets stuck in a loop.

This is not just a simple bug. It often indicates deeper system issues like corrupted boot files, failed updates, disk errors, or hardware problems.

In this advanced guide, you’ll learn how to break the repair loop and fix the issue step by step.

👉👉 Windows 11 Slow Performance Fix (12 Step-by-Step Methods 2026)

 💡Common Symptoms

• Stuck on “Preparing Automatic Repair”
• Infinite restart loop
• Black screen after repair attempt
• Unable to access Windows

👉 Root Causes 

• Corrupted boot configuration (BCD)
• Failed Windows update
• Disk errors or bad sectors
• System file corruption
• Hardware instability

🔍 Step 1: Understand the Loop Behavior (Critical Insight)

👉 Observe carefully:

• Loop starts after update → update issue
• Loop after power cut → disk corruption
• Loop randomly → hardware or driver

👉 This helps target the root cause faster

👉👉 How to Check SSD Health in Windows (most important )

🔧 Step-by-Step Fixes

2. Force Enter Recovery Mode

👉 First break the loop

Steps:

1. Turn on PC
2. When Windows logo appears → force shutdown
3. Repeat 2–3 times

👉 Recovery Mode will open

3. Run Startup Repair

Steps:

Go to:

👉 Troubleshoot → Advanced Options

Click Startup Repair

👉 Automatic fix attempt

4. Boot into Safe Mode

Steps:

Advanced Options → Startup Settings

Press F4 (Safe Mode)

👉 If Safe Mode works:

✔ Problem is software-related

👉👉 Laptop Not Turning On? (Complete Step-by-Step Fix Guide 2026)

5. Uninstall Recent Updates

👉 Most common cause

Steps:

1. Advanced Options
2. Click Uninstall Updates
3. Remove latest update

6. Run SFC Scan

command : sfc /scannow

👉 Fixes corrupted files

7. Run DISM Tool

command : DISM /Online /Cleanup-Image /RestoreHealth

👉 Repairs Windows image

8. Repair Boot Configuration (BCD)

command : 

                   bootrec /fixmbr

                   bootrec /fixboot

                   bootrec /scanos

                   bootrec /rebuildbcd

👉 Fixes boot loop issues

👉👉 SSD Not Detected in Windows 11 (7 Easy Fixes 2026)

9. Check Disk Errors

command :  chkdsk /f /r

👉 Fix bad sectors

10. Disable Automatic Repair 

👉 Stops loop temporarily

bcdedit /set {default} recoveryenabled No

11. Perform System Restore

👉 If restore point available

✔ Go back to working state

12. Check RAM Stability

command :  mdsched.exe

👉 Faulty RAM can trigger loop

13. Check Hard Drive Health

👉 Disk failure = repair loop

✔ Test drive if possible

👉👉 DNS Server Not Responding Error Fix (Windows 11 – 10 Easy Solutions 2026)

14. Reset Windows (Without Data Loss)

👉 If stuck persists:

Use “Keep my files” option

15. Clean Install Windows (Final Fix)

👉 If nothing works:

✔ Fresh install Windows 11

💡 Insights 

👉 Automatic Repair loop = symptom, not cause

👉 70% cases = corrupted boot files

👉 After update → rollback works best

👉 After power failure → disk repair required

👉 If Safe Mode works → software issue

👉 If Safe Mode fails → deeper system/hardware issue

👉👉 WiFi Connected But No Internet on Windows 11 (9 Easy Fixes 2026)

⚠️ Common Mistakes to Avoid

❌ Restarting repeatedly without fixing cause

❌ Ignoring disk errors

❌ Skipping Safe Mode test

❌ Running commands incorrectly

✅ Conclusion

         The “Preparing Automatic Repair” loop in Windows 11 can be frustrating, but it is fixable. By following this deep step-by-step guide, you can break the loop, repair system files, and restore your PC.